Alto Verb Bedienungsanleitung PDF herunterladen (Seite 12)

- MIXER

Interfacing to a Mixing Console

Using Aux Sends and Returns

Aux Send

Aux Return

MIXING CONSOLE

The Verb can accept mono or stereo sends at all system levels. The input

circuitry of the Verb can easily accept professional +8/9dBu levels while having

enough input and output gain to interface with the low signal levels of home

recording systems.

The Verb may be connected to a mixing console in several different ways. It

can be used to with multiple channels at once by using the auxiliary send and

return controls of the mixer. Another way of interfacing is to connect the Verb

directly to the insert send and return of a single channel that is to be effected.

More, Verb could be to connected to a mixer or recording console in-line

between the output of the mixing console and the input of a tape deck or power

amplifier. This last setup would effect the entire mix output.

Generally, on mixing consoles are available two types of auxiliary sends: pre-

fader sends (headphone or monitor), and post-fader sends for effects units.

Typically, if a mixer has more than two sends per channel (4, 6 or 8, perhaps),

the first two sends are reserved for the pre-fader sends, while the remaining

sends are used to send the signal to be effected to devices as the Verb.

Connect the Verb using post-fader sends, so fading a channel out, its effects

will fade also. Using a mixer's aux sends allows each channel to have its own

level control going to the aux output. It is possible to mix all the channels we

want to be sent to the effects by using the individual channels' aux send levels

on the mixer. Most consoles also have aux master controls, which set the over-

all level of each aux output. Sending signal to the Verb is only half of the

process. With a mixing console, the output of the Verb must go back to the

mixer and turned up in the mix before to be able to hear it. Depending from the

mixer, there are two options for returning the effected signal to the mix:

connecting to dedicated aux return inputs, or

connecting to channel inputs.

Everything is easy if the mixer provides dedicated inputs (called returns) for

effect devices like the Verb. If the mixer does not have these, or the available

returns have already been used all, it possible to connect the Verb to channel

inputs (if there are any remaining).

LTO

Hall 3

Plate 1

Plate 2

Room 2

Room 1

Room 3

Hall 2

Hall 1

OUTPUT

INPUT

MIX

VARIATIONS

010010010

SIGNAL

POWER

Flange

Chorus

Tremolo

Delay/Rev

Delay

Chorus/Rev

Flange/Rev

Rotary

Verb

24 32 BIT DIGITAL EFFECTS MODULE

ON OFF

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

Alto Verb Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern